Tyre safety – how to stay safe on the road

Tyres are the only point of contact between your vehicle and the road, and it is essential that they are in top condition. Without them, your car would be unstable and unable to perform properly. Unfortunately, many of us take our Tyres Sutterton for granted and fail to check them regularly.

There are a few simple steps to ensure your tyres are in good shape. Firstly, you should check the pressure regularly. This can be done with a simple pressure gauge, and it’s important to ensure that the pressure matches the manufacturer’s recommended settings. Secondly, you should check the tread depth of your tyres. This is important for good grip and wet weather performance, so make sure you check the tread depth and replace tyres when necessary. 

– Tyre types:

Tyres are an essential component of any vehicle and come in a variety of types and sizes. Depending on the make and model of the car, the types of tyres may vary. The most common tyres are all-season tyres, winter tyres, and summer tyres.

All-season tyres are designed to provide a balance of performance in both wet and dry conditions. They typically offer a good grip on dry roads, good braking and cornering performance on wet roads, and provide a comfortable ride. They are the ideal choice for those who drive mostly in urban areas and are looking for a reliable all-rounder.

Winter tyres are designed for use in colder temperatures and have a special rubber compound that helps them maintain grip on icy and snow-covered roads. They also have a deeper tread pattern that helps to provide better traction on slippery surfaces and are often studded to help provide extra grip on icy roads.

– How to check tyre pressure:

Maintaining the correct tyre pressure is important for both your safety and the longevity of your tyres. It’s easy to check, but you’ll need to do it regularly. Here’s how:

1. Get a tyre pressure gauge. These are available from most auto parts stores and can also be found at petrol stations.

2. Check the pressure when the tyres are cold, as the pressure increases when they heat up after driving.

3. Remove the valve cap and place the tyre pressure gauge over the valve stem. Push the gauge firmly onto the valve stem to ensure an accurate reading.

4. Read the pressure on the gauge and compare it to the recommended pressure for your tyres, which can be found in the owner’s manual or on the tyre sidewall.

5. If the pressure is lower than the recommended level, fill up the tyre with compressed air.

– How to check tread depth:

Tread depth is an important factor in maintaining safe and reliable vehicle performance. It’s important to periodically measure your tire tread depth to ensure that your tires have the optimal grip on the road.

Measuring your tread depth is fairly simple, though it’s best to use a tread depth gauge to get an accurate reading. You can purchase a tread depth gauge at most auto parts stores and online.

To use a tread depth gauge, simply insert the tool into the tread grooves of your tire. The depth gauge will show the depth of the tread in millimeters, and you’ll want to make sure that the depth is at least 1.6mm. If the depth is less than 1.6mm, then it’s time to replace your tires.

– How to change a tyre:

Changing a tyre can be intimidating but with a few simple steps and the right tools, it can be a relatively straightforward task. Here’s what you’ll need:

• Wheel wrench

• Jack

• Spare tyre

Step 1: Pull over onto the side of the road and turn on your hazard lights, if possible.

Step 2: Loosen the lug nuts. Use your wheel wrench to turn the nuts counterclockwise and loosen them, but don’t remove them yet.

Step 3: Jack up the car. Position the jack underneath the car. Make sure the jack is in the correct position and not near any moving parts. Slowly jack up the car until the tyre is off the ground.

Step 4: Remove the lug nuts. Now that the car is jacked up, you can safely remove the nuts. 

– How to store tyres:

Storing tyres correctly is an important step towards ensuring that your tyres remain in good condition for a long time. Tyres should be stored in a cool, dry place away from direct sunlight and away from any corrosive chemicals. If tyres are not stored correctly, they can become brittle and cracked, reducing their performance.

When storing tyres, it is important to check them for any signs of wear or damage. If any damage is found, it should be repaired or replaced before storing. The Tyres Sandholme should also be cleaned and inspected for any dirt or debris.

Tyres should be stored in an upright position, either on their own or in a tyre rack. If they are stored on the ground, they should be placed on a flat surface, such as a sheet of plywood, to prevent them from becoming distorted.

If the tyres are going to be stored for a long period of time, it is important to keep them inflated. 

Related Posts

Leave a Reply