Touchless Car Wash near Me: The Ultimate Guide

Recently, touchless car wash became more popular. Many car owners enjoy the idea of not using water to wash cars.

This guide is intended to help people understand touchless auto washing and explain why they should.

Why people love touchless car washing?

  1. Protects car enamel from scratches and swirls. More than 90% swirls and scratches car get are the result of poor car washing or drying. You can cause micro-scratching by pressing towels or wash mitts full of dirt and debris on a car’s paint. Marring on dark-colored cars is more common than black ones. This is because the swirl marks and scratches are easier to spot. Touchless car wash systems allow you to avoid such marring because other than high-pressure water, there is no other thing that can be applied to your car’s surface.
  2. Use to save time : Touchless washing your car significantly cuts down the time spent cleaning it. The process of washing your car with wash cloths takes time. It is also more difficult to dry it using towels. That is why touchless quick quack car wash makes it so easy. Simply rinse your car with warm water, spray foam on it and let it dry.
  3. Saves money. Touchless car washing allows you to save water, and you don’t have to purchase towels and hand wash mitts.
  4. Less risk of damage. It is easy to accidentally damage or damage car parts and accessories by washing it the old-fashioned way. antennas. Avoid such damage by using touchless car washing.

Allows you to maintain your car’s cleanliness between thorough washings. A quick and easy 20-minute car wash will help keep your car looking fantastic until you do a full body wash.

DIY Touchless Car Wash Vs. Visit an Automatic Carwash

It’s true that full-service touchless auto washes are convenient. They are quite affordable and can finish the job in 10 minutes or less. They use harsher cleaners than professional detailers or would recommend, but most automated touchless cars washes are very budget-friendly.

These products can remove any wax, varnish, or sealant you have applied to your vehicle. Avoid giving your car an automated touchless washing if you haven’t applied any additional paint protection. In-person touchless car wash gives you more control of the soap and equipment used. You can achieve better results by using better soap and more sophisticated equipment.

Importantly, the fixed jets containing pressurized water used in automated car washing machines cannot reach every crevice and corner of a car the way that a person could reach them with a pressure washer wand.

A large blowdryer used in automatic touchless car washes won’t dry your car as well as it isn’t targeted. Because you can have more control over the drying process, touchless car washing is again a better option. You can focus your blower in all places that are hard to reach to remove any water.

Step-By-Step Guide To A Touchless Wash

Make sure your car’s doors and windows are closed tightly when you do a touchless vehicle wash. This will keep the pressurized water out of the car’s interior. To avoid damaging your car’s exterior antenna, it would be a good idea for you to trim it when you wash it. Also, avoid doing the touchless wash in direct sunshine or on a hot car’s surface. You can do it in a garage (or another shaded place) if the temperature isn’t cool outside.

Step 1: The Pre-Rinse

Pre-rinsing is as simple as hosing down the car with a pressure washing machine. The pre-rinse serves to soften/or dislodge large pieces of dirt, debris, and before performing the foam cannon washing. Start spraying about 4-5 feet from your vehicle. You can adjust your distance depending on how high the water pressure is.

Step 2: Foam Cannon Or Foam Gun

A foam cannon will be better. It’s an attachment to a pressure washing machine that evenly applies carwash soap to your vehicle. Foam gun is a garden-hose attachment that can do the job but does not shoot at the same pressure.

Make sure to use the soap/water ratios on your car soap bottle. Add your car soap to the foam cannon and water. Use your hands to stir the mixture. Attach the canister back to the foam cannon. Finally, connect the foam gun’s 1/4 inch quick connection plug. You can then adjust the soap control knob, nozzle control knob, or both, and turn on your pressure washer to spray your car foam.

The soap control head controls how much soap is drawn up by the pressure washer’s suction tube. Adjusting this to draw up more soap can result in thicker foam. The foam that sits longer allows the detergents or active ingredients in the soap to penetrate the car’s surface and remove dirt and grime.

Step 3 Rinse

Remember to use medium pressure when rinsing your car. You don’t want to damage the paint. Adjust the nozzle control knob to make the water stream spread over a large area. You should maintain a safe distance between the car and the water source (4-5 feet) just as you did for the pre-rinse.

Step 4 Dry

If you’re looking for the best way to dry your car, we’ve got you covered. You can use a blower specially designed for drying cars to perform this simple washing. You may also use leaf blowers. However, a dirty one could blow dirt onto your car. Large nozzles make it difficult for you to direct air to particular areas on your car.

You should work from the top to dry your car. You should work one section at the time. Then blow air into the crevices, door jambs, vents to drain any water trapped there.

Related Posts

Leave a Reply