Potential Solutions For Canon 5B00 Error

We recommend the Restore PC repair tool to fix many PC issues. This software will fix common errors in your computer, protect you against file loss, malware, and hardware failure, and optimize your computer for maximum performance. In just 3 steps, fix PC problems and get rid of viruses:

  1. Get Restoro PC Repair tool with Patented Technologies (patent available).
  2. To find Windows problems that may be causing your computer problems, click Start Scanning.
  3. To fix problems affecting your computer’s performance and security, click Repair All
  4. Restoro was downloaded by 560.350 users this month.

The error code 5b00 occurs quite often on Canon printers. When you try to print a document with the printer on, you will first notice it turning on.

But scanning is not possible. Although the light blinking green and orange several times a row, this article will be of assistance.

Below are some solutions to the problem canon 5b00 error To avoid any problems, make sure you follow these steps.

What should I do if my Canon printer gives me an error 5b00

1. Reset the waste-ink counter

  1. First, disconnect the power and the USB cables.
  2. Press down on the Power button and open the cartridge door.
  3. While plugging the power cord into a wall socket, continue to hold down the Power button.
  4. Continue holding down the Power button until your printer begins to reset itself.
  5. You can release it once all the lights have been turned on.
  6. Wait for the red power light turn off.
  7. Next, quickly release the Power button two more times .
  8. After blinking for a few seconds, the green light should stop flashing and then stabilize.
  9. Close the cartridge door to print again.

Ink spillages on your printer in Windows 10 are often the cause of the Canon printer 5b00 error. This applies to full ink absorbers or full waste ink counters.

This quick-fix can be used to remove any error codes that might appear when you turn on the printer.

You can also take a look at our comprehensive guide to help you remove the printer from Windows 10.

2. Manually clean the waste ink pad

  1. Open the ink cartridge box. This compartment may be located in the back or front depending on which Canon model you are using.
  2. Wait for ink cartridges movement to complete.
  3. Next, unplug the power cable from your printer.
  4. A row of white rollers is hidden behind the cartridge. You will find a small area near the roller that looks similar to a foam pad.
  5. Pull gently on the rubber frame to remove the waste ink absorber .
  6. Use a paper towel to clean it. You should collect any ink on the paper towels.
  7. All cartridges should be returned to their original places.
  8. Install the frame again in the printer.
  9. Now, press and hold the Power button. Reconnect the power cord.
  10. Release the button when the printer turns on.
  11. Give it five seconds, then push the Power button once more. This will reset the printer’s internal memory, and override the 5b00 error codes.

If the problem persists, you can try the steps above to resolve it. The printer will inform you if the waste ink pads become saturated. Don’t panic, a manual clean can often work like a charm.

A bucket of soapy hot water may be used. Be sure to allow the waste ink absorber to soak for enough time to allow the ink to escape before you attach the foam pads again and then install the waste.

3. There are other solutions

This error can often be caused by a dirty print head. Make sure you check your print head regularly and ensure it is clean.

You should also check the level of ink in the system. You have no choice but to fill the system to its maximum capacity if the ink level is low.

Continue troubleshooting by setting your printer back to factory settings.

You can find the best Canon ink supplies at the lowest prices by checking out the Amazon deals. These are just a few ways to fix Canon printer error 5b00. Follow the steps above and let us know how they worked for your printer.

Everyone who has or uses Canon inkjet printers will be able to see Error Code 5B00. Many printer users have experienced this error, as it isn’t predictable. Canon technicians suggest some general fixes to the Error Code 5B00 Canon G2000. This includes turning the printer OFF and then turning it ON. We found a more robust solution that involved working with the printer head.

What causes the printer to be in error?

One of the causes is

An error occurred on the printer when a paper was printed with the ink empty.

Canon claims that it could also be caused by foreign cartridges which cause the printer to not work. This error can be fixed by cleaning and checking the printheads. It is possible to fix the problem if the printer’s warranty has expired.

Troubleshooting Guide:

How do I fix the printer that is showing error 5B00?

This error can be fixed with a few steps. These solutions are based on the many times that a printer technician has faced the same error repeatedly.

We will guide you step-by-step through the solution and fixes for this problem. Choose one of these solutions:

Related Posts

Leave a Reply